JT996 - MAINTENANCE TECHNICIAN NS

Thousand Oaks, CA

Temporary

Biopharmaceutical

Mid Level

QUALITY CONSULTING GROUP, a leader in the pharmaceutical, biotech, medical devices, and manufacturing industry, is looking for a talented, highly motivated and enthusiastic to join our team. In this role, you’ll work with a highly enthusiastic team, contributing in a world-class manufacturing industry in Puerto Rico & USA.

Responsibilities:

Ensure reliable, compliant manufacturing operations by maintaining critical equipment, maximizing uptime, and driving continuous improvements that reduce downtime.
Maintain and repair all production mechanical equipment.
Support the maintenance, operation, and repair of all systems, subsystems, and equipment within the Fill / Finish facility.
Provide support to engineering and operations in the design, installation, testing, operation, and maintenance of Fill Finish manufacturing and support equipment.
Ensure all assigned equipment and associated subsystems are maintained in accordance with Federal, State, Local, and regulations, procedures, and policies.
Maintain all assigned equipment areas in a constant state of inspection readiness.
Identify training deficiencies and provide recommendations and training where applicable.
Continuously evaluate and improve maintenance practices and documentation.
Perform troubleshooting of electrical, pneumatic, and mechanical equipment.
Complete preventive maintenance and assigned paperwork following all cGMP documentation guidelines.
Coordinate contractors for repairs, modifications, and installations of equipment.
Work directly with Manufacturing, Engineering, and Quality organizations on new system installations or modifications.
Attend all required cGMP and Safety training.
Daily Rounds of the Manufacturing Facility documenting issues and creating work orders
Handle incoming issues, CM's and GM's as they come through from Manufacturing
Monitor Building Management System
Keep Maintenance Shop clean and ready for use
Respond to emails, On-call Phone, Direct messages

Qualifications:

Associate degree and 2 years of experience OR 2 years in a technical school setting with hands-on experience OR High school diploma
Must have at least 2 years of relevant experience
Must be amenable to work Work Graveyard shift and weekends
December / July Shutdown work is a Requirement.
Must be willing to work on alternate days at times for training purposes.
Thorough working knowledge of pharmaceutical filling, freeze drying, and packaging equipment operation, maintenance, and repair
Full working knowledge of pumps, valves, mechanical seals, motors, and proper lubrication
Strong documentation and attention to detail skills
Full working knowledge of cGMP and Predictive Maintenance philosophy and techniques
Ability to create, read, interpret, and revise engineering documents
Familiarity with machine shop equipment including CNC machine and lathe is a plus
Ability to work safely with hazardous chemicals, high and low temperature liquids, high pressure liquids and gasses, steam, varying electrical voltages, and moving machinery
Ability to read and understand P&IDs, work from SOPs, and use basic computer skills
Knowledge of and ability to use Computerized Maintenance Management Systems
3rd Shift
12 Hour shifts (5pm-6am) 3/12 - 4/12 work schedule. Back half (Wednesday- Friday & every other Saturday) of week.

Quality Consulting Group, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.

Apply for this position

Required*

First Name*

Last Name*

Email Address*

Phone*

Address

Resume*

We've received your resume. Click here to update it.

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

Do you possess an Associate's degree in related area?*

Do you have experience working with Computerized Maintenance Management Systems (CMMS)?*

Do you have experience working with pumps, valves, mechanical seals, motors, and proper lubrication?*

The following questions are entirely optional.

Invitation for Job Applicants to Self-Identify as a U.S. Veteran

A “disabled veteran” is one of the following:
- a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
- a person who was discharged or released from active duty because of a service-connected disability.
A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran status

I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability

Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Name	Date

Human Check*

Submit Application